show transceiver interface module <module number> --chip
On Fri, Jun 10, 2011 at 3:27 PM, Mandeep Singh <s_mand...@hotmail.com> wrote: > > Hi, > Is there a similar command on the 6500s as on the Junipers below: > > show interfaces diagnostics optics xe-0/0/8 > Physical interface: xe-0/0/8 > Laser bias current : 39.304 mA > Laser output power : 0.7050 mW / -1.52 dBm > Module temperature : 41 degrees C / 106 degrees F > Module voltage : 3.2490 V > Receiver signal average optical power : 0.1063 mW / -9.73 dBm > Thanks. > -Mandeep > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Just my $.02, your mileage may vary, batteries not included, etc.... _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/