> > > Message: 4 > Date: Sun, 10 Jul 2011 16:35:35 +0800 > From: Mark Tinka <[email protected]> > To: [email protected] > Subject: Re: [c-nsp] MultiChassis LACP > Message-ID: <[email protected]> > Content-Type: text/plain; charset="us-ascii" > > On Wednesday, July 06, 2011 05:53:03 PM Phil Mayers wrote: > > > There might be some confusion about terminology here. > > > > 3750 stacks can have port channels terminating on >1 unit > > in a stack. Personally I wouldn't call this "multi > > chassis" link aggregation - the clear analogy is chassis > > == stack. > > Agree. > > The distinction needs to be clear. > > Mark >
If it is two switches / two chassis / two boxes connected in some fashion with fiber, copper, magic switch cable and it can provide a lacp link that can survive a failure of one of the devices ... it is a multi-chassis link aggregation capable device as far as I can figure. I have 7010s, 5020/5010s, 5548s, VSS, 3750s and they all look just the same to the end device - channel-group xyz mode active. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
