Just finished configuration/installation of a secondary FWSM for failover (active/standby), but it is not behaving as expected (I have ASAs in similar configurations). There are standby IPs configured on the vlans, and they respond to pings from the 6500 itself, but not otherwise.
The ARPs show up properly, but on the "show mac address" lists the primary MAC on each of the firewall-group vlans, but the secondary MAC only appears for the failover vlan. Is this normal? The ASAs answer on either address, and the MACs populate all their vlans. But not the FWSM. Jeff _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/