OSPF doesn't run on the failover.. Is that causing you issues?
On Oct 14, 2011, at 6:49 PM, "Jeff Kell" <jeff-k...@utc.edu> wrote: > Just finished configuration/installation of a secondary FWSM for > failover (active/standby), but it is not behaving as expected (I have > ASAs in similar configurations). There are standby IPs configured on > the vlans, and they respond to pings from the 6500 itself, but not > otherwise. > > The ARPs show up properly, but on the "show mac address" lists the > primary MAC on each of the firewall-group vlans, but the secondary MAC > only appears for the failover vlan. > > Is this normal? The ASAs answer on either address, and the MACs > populate all their vlans. But not the FWSM. > > Jeff > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ NOTICE TO RECIPIENT: The information contained in this message from Great River Energy and any attachments are confidential and intended only for the named recipient(s). If you have received this message in error, you are prohibited from copying, distributing or using the information. Please contact the sender immediately by return email and delete the original message. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
