I was brave (or stupid?) enough to try 15.0(1)SY on sup2t. It appears to work otherwise ok with our simple setup except IPv6 BGP. The neighbours remain in the idle state. When enabling debug bgp ipv6 unicast I see the algo following line in the logs:
nbr global [...] Active open failed - route to peer is invalid I can ping the neighbour address from the router. Route and CEF tables agree on where the peer is. What am I missing here? Is there some specific parameter I need to enable so that IPv6 BGP would work on the 15.0(1)SY? The same config worked on 12.2SX (sup32) and also on 12.2(50)SY (sup2t). I have the option of switching back to 12.2(50)SY but I would like to find out why this problem appears on 15.0(1)SY. Cheers, Matti _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
