In all the Nexus doc's for method long, I am seeing 20,000 as the 1x10Gb (10Gb total) cost and it should be 2,000. Furthermore, 2x10Gb (20Gb total) is 1,000 and in the doc's it shows as 10,000. Can someone from Cisco please clear up the design and configuration guides sooner than later?
Documents should be corrected with the following for long: 10Gb - 2000 20Gb - 1000 40Gb - 500 Anyone else see this in the doc's and have questions about it? Mark NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
