Tim- Below is the reference. Google has some other folks tying to that same page. Fix that one, and fix all I guess.
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/C07-572834-00_STDG_NX-OS_vPC_DG.pdf - this has the incorrect data Mark Mason | Network Engineer, Adv | JHA Communications Infrastructure Jack Henry & Associates, Inc.® | 417.235.6652 x1520 | mma...@jackhenry.com "Decisions without actions are pointless. Actions without decisions are reckless." -----Original Message----- From: Tim Stevenson [mailto:tstev...@cisco.com] Sent: Thursday, December 01, 2011 3:26 PM To: Mark Mason; cisco-nsp@puck.nether.net Subject: Re: [c-nsp] Nexus enabling pathcost method long - documentation Mark, What documents are you referring to? In the N7K L2 config guide, the default port costs are shown & appear to be correct. Please provide pointers to any incorrect docs and we can have them checked/fixed. http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/layer2/configuration/guide/Cisco_Nexus_7000_Series_NX-OS_Layer_2_Switching_Configuration_Guide_Release_5.x_chapter7.html http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/layer2/configuration/guide/Cisco_Nexus_7000_Series_NX-OS_Layer_2_Switching_Configuration_Guide_Release_5.x_chapter8.html#con_1706125 Tim At 11:24 AM 12/1/2011, Mark Mason murmered: >In all the Nexus doc's for method long, I am seeing 20,000 as the >1x10Gb (10Gb total) cost and it should be 2,000. Furthermore, 2x10Gb >(20Gb total) is 1,000 and in the doc's it shows as 10,000. Can someone >from Cisco please clear up the design and configuration guides sooner >than later? > >Documents should be corrected with the following for long: > >10Gb - 2000 > >20Gb - 1000 > >40Gb - 500 > >Anyone else see this in the doc's and have questions about it? > >Mark > >NOTICE: This electronic mail message and any files transmitted with it >are intended exclusively for the individual or entity to which it is >addressed. >The message, >together with any attachment, may contain confidential and/or >privileged information. >Any unauthorized review, use, printing, saving, copying, disclosure or >distribution is strictly prohibited. If you have received this message >in error, please immediately advise the sender by reply email and >delete all copies. >_______________________________________________ >cisco-nsp mailing list cisco-nsp@puck.nether.net ><https://puck.nether.net/mailman/listinfo/cisco-nsp>https://puck.nether >.net/mailman/listinfo/cisco-nsp >archive at ><http://puck.nether.net/pipermail/cisco-nsp/>http://puck.nether.net/pip >ermail/cisco-nsp/ Tim Stevenson, tstev...@cisco.com Routing & Switching CCIE #5561 Distinguished Technical Marketing Engineer, Cisco Nexus 7000 Cisco - http://www.cisco.com IP Phone: 408-526-6759 ******************************************************** The contents of this message may be *Cisco Confidential* and are intended for the specified recipients only. NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
