When you pull out a linecard -the particular interfaces config will automatically be converted into the: "interface preconfigure gig 0/1/1" Than you can go ahead and edit the interface config if you like before you insert the new card back using the "interface preconfigure" cmd in the config mode
Also when planning on inserting a brand new card you can preconfigure the interfaces for the particular card beefier the card is inserted adam -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Daniel Roesen Sent: Wednesday, December 28, 2011 1:49 PM To: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] How to see interface configuration after card failure on ASR9K On Wed, Dec 28, 2011 at 01:37:34PM +0100, Vitkovsky, Adam wrote: > Pre-configuration is possible with XR as well So you can preconfigure interfaces, but not see and edit the remembered config of interfaces which got physically removed (or linecard shut down)? Best regards, Daniel -- CLUE-RIPE -- Jabber: d...@cluenet.de -- dr@IRCnet -- PGP: 0xA85C8AA0 _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
