In my case of ipv4 and vpnv4 I had to add default-info orig within vrf under bgp in order for my vpnv4 neighbors to learn default route.
Under bgp.... vrf one rd 10.101.0.1:1 default-information originate address-family ipv4 unicast redistribute ospf 1 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of henrry huaman Sent: Thursday, April 26, 2012 1:28 AM To: Andrew Koch Cc: [email protected] Subject: Re: [c-nsp] default-information IPv6 IOS-XR Thanks Andrew. What about if we need to send default route IPv6 into vrf? ie 6vPE. Thnx BR ________________________________ De: Andrew Koch <[email protected]> Para: henrry huaman <[email protected]> CC: "[email protected]" <[email protected]> Enviado: Miércoles 25 de abril de 2012 22:44 Asunto: Re: [c-nsp] default-information IPv6 IOS-XR On Wed, Apr 25, 2012 at 22:03, henrry huaman <[email protected]> wrote: > Hi guys, > Please could help us, we need to send defaul route in IPv6 (IOS-XR). Hi Henry, I am guessing that you want to send a default route to a BGP peer. In this case, your syntax below will not work out. You are instead looking for "default-originate" under the address family under the particular neighbor. router bgp 65404 neighbor 2001:db8::1 address-family ipv6 unicast default-originate > And we have only this command in bgp proccess "default-information originate". This is used to import a default-route into the BGP process with the redistribute command. Typically when you redistribute from another protocol 0.0.0.0/0 and ::/0 are ignored. This changes that default behavior. HTH, Andy _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
