Hey guys,
I am doing some research into the monitoring of our blade's switching fabric. I found that we can monitor via SNMP the ingress / egress blade fabric utilisation. I see from the command line you can issue: "show fabric switch [switch.number] utilization" What I can't seem to get is the SNMP data for the non active switch in a VSS configuration. For SNMP the MIB "ciscoCat6kCrossbarMIB" allows you to monitor the active switch fabric utilisation but not the standby. A walk of this MIB tree doesn't seem to show the standby switch at all. I see there is the CISCO-VIRTUAL-SWITCH-MIB but this looks to me more for monitoring the VSS status. Any SNMP / monitoring guru's able to help with this one? Cheers, Aaron. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
