Hi, i think that module is in ROMMON mode, if yes boot manually . bye. On Mon, Jun 18, 2012 at 2:42 PM, Phil Mayers <p.may...@imperial.ac.uk>wrote:
> On 18/06/12 09:03, osama hammoudeh wrote: > > >> >> I tried to : >> >> 1- reboot the core switch >> >> 2- change the slot where the module is installed to other slot >> >> 3- installing the module on other core switch >> >> >> >> but I still have the same problem . >> > > It sounds like it is failing the diagnostics, and probably needs an RMA if > you've rebooted/moved the module and the problem persists. > > Check the output of: > > sh diagnostic result module X > > ...but really, you need to contact Cisco / your reseller and get a > replacement, I suspect. > > ______________________________**_________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/**mailman/listinfo/cisco-nsp<https://puck.nether.net/mailman/listinfo/cisco-nsp> > archive at > http://puck.nether.net/**pipermail/cisco-nsp/<http://puck.nether.net/pipermail/cisco-nsp/> > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/