On 1/30/13 2:52 PM, false wrote: > The T-1 seems to be up from a Layer-2 perspective. Something is wrong with my > routing though. The interface does NOT show up in the “sh ip route? Output. > I would expect to see it as a directly connected interface but it isn't > there. The card is in “slot 1” so I’m thinking that may have something to do > with but that’s just a hunch. We also have a 9-port switch in the router as > well. “Sh diag” looks clean too. Any ideas?
What does "show interface" display for line protocol? Try: interface Serial0/1/0 encapsulation ppp service-module t1 timeslots 1-24 speed 64 service-module t1 framing esf service-module t1 linecode b8zs -- Jay Hennigan - CCIE #7880 - Network Engineering - j...@impulse.net Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
