Are u talking about the inter-as mpls/vpn? On Apr 17, 2013 3:29 PM, "Mattias Gyllenvarg" < mattias.gyllenv...@bredband2.se> wrote:
> Beware of one thing 6PE can not do. > > BGPv6 over multi-hop will not work as there is no recursive lookup from v6 > too v4 in your BGP speaker. > This is a feature, not a bug... so it will not be fixed. > > Otherwise 6PE is a breeze. > > > On 14 April 2013 21:56, Ahmed Hilmy <hilmy...@gmail.com> wrote: > > > Hello Expert, > > > > We are planning to deploy IPv6 at our IPv4 Backbone, our PE to as Dual > > Stack and carry IPv6 packet through MPLS label. > > There are different scenarios, one of them is 6PE. > > Would you please guide me from where can i start ? > > > > Thanks, > > > > Ahmed > > _______________________________________________ > > cisco-nsp mailing list cisco-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > > -- > *Med Vänliga Hälsningar - Best Regards* > > *Mattias Gyllenvarg* > *Nätutveckling* > Bredband2 > > Tel: +46 406219712 > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/