Hi allI have the below topology
R1 E1/0 - R5 F1/0
Its connected via a layer 2 switch , I have advertised Loopback interface on R1
(1.1.1.1)now , the route is installed in R5 routing tableMy concern is that
E1/0 has a BW value of 10000 and delay of 1000 , F1/0 of R5 has BW value of
100000 and delay of 100When I checked the Metric of the route (FD) on R5 , all
calculations were based on F1/0 values and the values of E1/0 were ignored ,
why?
Thanks
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
