Hello group,
Due to the implementation of CoPP on a few 6500s, we had to enable QoS. Now we are suffering of outputs drops on many interfaces, mainly due to fact that the majority of the traffic is COS=0. Is there a way to disable WRR and get the previous behavior (no qos) ? I dont like the idea of managing the complexity of SRR if we dont have QoS Policies in place. We have 1p7q8t, 1p2q2t and 1p3q8t type of cards. The only option I see is to put all the traffic into queue 1 to simulate the default fifo queue, something like this for the 1p3q8t card (6704-10GE): +++++++++++++++++++++++++++++++ Router(config-if)#do sh run int te2/1 Building configuration... Current configuration : 190 bytes ! interface TenGigabitEthernet2/1 no ip address shutdown wrr-queue bandwidth percent 100 0 0 0 0 0 0 wrr-queue queue-limit 100 0 0 0 0 0 0 wrr-queue cos-map 1 1 0 1 2 3 4 5 6 7 end Router(config-if)# +++++++++++++++++++++++++++++++ But doing this kind of stuff for hundreds of interfaces doesnt make too much sense. Thanks. Regards, Antonio Soares, CCIE #18473 (R&S/SP) amsoa...@netcabo.pt http://www.ccie18473.net <http://www.ccie18473.net/> _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/