Hi Pshem,
I see so the "tunnel feature/keyword" basically applies everywhere where the 
BPDUs have to traverse (or be tunneled through) a native L2 switched network in 
order to get to the desired device/l2pt endpoint. 

adam
-----Original Message-----
From: Pshem Kowalczyk [mailto:pshe...@gmail.com] 
Sent: Thursday, October 03, 2013 10:48 AM
To: Adam Vitkovsky
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] VPLS ASR1k - ME3800 - no L2 tunnelling ?

Hi Adam,

With 'forward' the ethernet packets are forwarded 'as-is' through the MPLS 
topology. With 'tunnel' the destination MAC address gets rewritten to a 
'special'  multicast MAC addresses, the remote end of the 'tunnel' restores the 
original MAC address.

Forward can be used if both customer devices are connected directly to PEs, if 
one side connects to a L2 only devices you have to use tunnel.

kind regards
Pshem


On 3 October 2013 21:23, Adam Vitkovsky <adam.vitkov...@swan.sk> wrote:
> Hi Waris,
> So on ME3800 I read the l2pt tunnel is not supported on EFPs with 
> PW/xconnect configured on them, though IOS will let you enter the 
> command with no complains.
> So to work around this I should be using l2pt forward instead right?
>
> Is there actually a difference in function of these two commands please?
>
>
> adam
> -----Original Message-----
> From: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf 
> Of Waris Sagheer (waris)
> Sent: Wednesday, October 02, 2013 6:29 PM
> To: Chris Russell; cisco-nsp@puck.nether.net
> Cc: Mostafa Mansour (mosmanso)
> Subject: Re: [c-nsp] VPLS ASR1k - ME3800 - no L2 tunnelling ?
>
> Hi Mostafa,
> Can you help with ASR1K L2PT behavior? What is supported on ASR1K?
>
> Hi Chris,
> I am copying Mostafa (ASR 1K expert) to confirm the L2PT behavior on ASR1K.
> Just a side note from ME perspective, I would recommend using L2PT 
> forward command rather than L2PT tunnel.
>
> Best Regards,
>
> [http://www.cisco.com/web/europe/images/email/signature/horizontal06.j
> pg]
>
> Waris Sagheer
> Technical Marketing Manager
> Service Provider Access Group
> wa...@cisco.com<mailto:wa...@cisco.com>
> Phone: +1 408 853 6682
> Mobile: +1 408 835 1389
>
> CCIE - 19901
>
>
> <http://www.cisco.com/>
>
>
>
> [Think before you print.] Think before you print.
>
> This email may contain confidential and privileged material for the 
> sole use of the intended recipient. Any review, use, distribution or 
> disclosure by others is strictly prohibited. If you are not the 
> intended recipient (or authorized to receive for the recipient), 
> please contact the sender by reply email and delete all copies of this 
> message.
>
> For corporate legal information go to:
> http://www.cisco.com/web/about/doing_business/legal/cri/index.html
>
>
>
> From: Chris Russell <ch...@nifry.com<mailto:ch...@nifry.com>>
> Organization: ntech
> Date: Saturday, August 31, 2013 6:18 AM
> To: "cisco-nsp@puck.nether.net<mailto:cisco-nsp@puck.nether.net>"
> <cisco-nsp@puck.nether.net<mailto:cisco-nsp@puck.nether.net>>
> Subject: Re: [c-nsp] VPLS ASR1k - ME3800 - no L2 tunnelling ?
>
> On 21/08/2013 10:00, Chris Russell wrote:
> On 21/08/2013 09:54, Adam Vitkovsky wrote:
> And I assume no BPDUs are passed either.
> Is it possible to issue cmd: "l2protocol peer" or all the l2protocol 
> commands are rejected altogether?
> Just to see if the L2protocol status changes somehow.
>
>
>   As a final thread closing to this one, with thanks to various 
> people, especially Adam, who responded -
>
>   L2 tunnelling of control packets (BPDUs) is NOT supported on the ASR1K.
>
>
>
> Thanks
>
> Chris
>
> _______________________________________________
> cisco-nsp mailing list
> cisco-nsp@puck.nether.net<mailto:cisco-nsp@puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp@puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp@puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to