Hi Sander, Thanks for the reply, that was our first thought as well... we tried, but only the default sdm template was available to us. I've just had a scan through the datasheet and noticed this;
Switch Database Management (SDM) templates (with the Scalability license only) This is a £3000+ licence (L-ME3800X-S).. which isn't great just to enable EIGRP! Can anyone here confirm if this would provide EIGRP for IPv6? I'll check with cisco tomorrow. The datasheet does not mention EIGRP under unicast IPv6 routing protocols, regardless of licence. There is one statement "The Services Scalability license enables full scalability for Layer 2, IP routing, MPLS resources and the use of Switch Management Database (SDM) templates." but I assume this simply means more resource being unlocked. A cisco switch/rtr without eigrp.. first time I've encountered it! SteveH -----Original Message----- From: Sander Steffann [mailto:[email protected]] Sent: 09 March 2014 22:43 To: Steve Housego Subject: Re: [c-nsp] Cisco ME3800X with EIGRP Hi Steve, > I suspect this is an error in the document as the commands simply aren't there I'm not familiar with that switch, but missing commands on switches are often caused by using the wrong SDM template... You might want to check the options there. Cheers, Sander ________________________________ [http://www.it-ps.com/wp-content/uploads/2013/12/itps-logo.png] "Helping Your ICT Budget Deliver to its Maximum Potential" Steve Housego Principal Consultant IT Professional Services Axwell House Waterside Drive Metrocentre East Business Park Gateshead Tyne & Wear NE11 9HU T. 0191 442 8300 F. 0191 442 8301 [email protected]<mailto:[email protected]> Check out our new website at www.it-ps.com <http://www.it-ps.com/> and see how we can help your IT budget deliver more for less. Company No. 3930001 registered in England VAT No. 734 1935 33 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
