What version of code are you running?
On Sun, Mar 9, 2014 at 6:00 PM, <[email protected]> wrote: > Hi NSP, > > Is anyone familiar with the 3800X and why we are unable to configure EIGRP > for IPv6 even though its clearly stated in the configuration guide as > available? > > > http://www.cisco.com/c/en/us/td/docs/switches/metro/me3600x_3800x/software/r > elease/15-3_1_S/configuration/guide/3800x3600xscg/swipv6.html#wp1117377 > > We are a cisco only shop and prefer to use EIGRP to distribute our > loopbacks > and backbone links and we've came across this issue while trying to dual > stack. > > I suspect this is an error in the document as the commands simply aren't > there, if so - anyone got any inside info on if cisco plan to support eigrp > for IPv6 on their own switch anytime soon!? > > Just found a section that states there's plenty missing for IPv6 with these > switches - can anyone elaborate why cisco isn't putting the features into > this switch, this has been excellent for us as ipv4 mini-pe. > > Unsupported IPv6 Unicast Routing Features > .IPv6 policy-based routing > .IPv6 virtual private network (VPN) routing and forwarding (VRF) table > support > .IPv6 packets destined to site-local addresses > .Tunneling protocols, such as IPv4-to-IPv6 or IPv6-to-IPv4 > .The switch as a tunnel endpoint supporting IPv4-to-IPv6 or IPv6-to-IPv4 > tunneling protocols > .IPv6 unicast reverse-path forwarding > .IPv6 general prefixes > .HSRP for IPv6 > .SNMP and Syslog over IPv6 > .MPLS for IPv6 > .ACL for IPv6 > .BFD for IPv6 > .IPv6 Multicast > .RIP for IPv6 > .EIGRP IPv6 > > Many thanks > > SteveH > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
