GRE is not supported on the ASR901.
On Mon, May 12, 2014 at 5:59 AM, Ivan <cisco-...@itpro.co.nz> wrote: > I have some Cisco ASR901s and would like to have a layer 2 or layer 3 > tunnel between them over a layer 3 network. > > I have configured GRE and tunnel is up and it is possible to ping the > remote ends. All looks good from the control plane side but I am not > having success with traffic being forwarded. > > Although I have been able to configure this as far as I can tell there is > nothing in the doco for this. I am thinking it maybe one of those "you > can configure but not supported" things. > > Can anyone confirm if GRE tunnels or similar are actually supported? > > Hardware: ASR 901 > Software: 15.4(1)S1 > License Level: IPBase > > Thanks > > Ivan > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/