I can't find info that says they are supported, but I'd assume not.
On Mon, May 12, 2014 at 5:38 PM, Ivan <cisco-...@itpro.co.nz> wrote: > Thanks Pete. Do you know if any of the other tunnelling modes are > supported? > > ipip IP over IP encapsulation > ipsec IPSec tunnel encapsulation > ipv6 Generic packet tunneling in IPv6 > ipv6ip IPv6 over IP encapsulation > > Thanks > > Ivan > > > GRE is not supported on the ASR901. > > > > > > On Mon, May 12, 2014 at 5:59 AM, Ivan <cisco-...@itpro.co.nz> wrote: > > > >> I have some Cisco ASR901s and would like to have a layer 2 or layer 3 > >> tunnel between them over a layer 3 network. > >> > >> I have configured GRE and tunnel is up and it is possible to ping the > >> remote ends. All looks good from the control plane side but I am not > >> having success with traffic being forwarded. > >> > >> Although I have been able to configure this as far as I can tell there > >> is > >> nothing in the doco for this. I am thinking it maybe one of those "you > >> can configure but not supported" things. > >> > >> Can anyone confirm if GRE tunnels or similar are actually supported? > >> > >> Hardware: ASR 901 > >> Software: 15.4(1)S1 > >> License Level: IPBase > >> > >> Thanks > >> > >> Ivan > >> > >> _______________________________________________ > >> cisco-nsp mailing list cisco-nsp@puck.nether.net > >> https://puck.nether.net/mailman/listinfo/cisco-nsp > >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > >> > > > > > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/