Hi John, Should be the following:
conf t router pim address-family ipv4 register-source Loopback0 Or the obligatory oneliner: router pim address-family ipv4 register-source loopback 0 Regards, Steinar On 20/08/14 22:04, "John Neiberger" <[email protected]> wrote: >I have a use case where I really need to force some ASR9Ks to use their >loopback addresses as the source for PIM register messages but there >doesn't seem to be a way to do it. I've checked up to version 5.2 and >there >doesn't seem to be a command to do this like there is in IOS. > >Do any of you know a way to do this? > >Thanks, >John >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
