Thanks! For whatever reason, I couldn't find it in the 5.x PIM command references.
John On Thu, Aug 21, 2014 at 2:32 AM, Rimestad, Steinar < [email protected]> wrote: > Hi John, > > Should be the following: > > conf t > router pim > address-family ipv4 > register-source Loopback0 > > > Or the obligatory oneliner: > > router pim address-family ipv4 register-source loopback 0 > > Regards, > Steinar > > > > > On 20/08/14 22:04, "John Neiberger" <[email protected]> wrote: > > >I have a use case where I really need to force some ASR9Ks to use their > >loopback addresses as the source for PIM register messages but there > >doesn't seem to be a way to do it. I've checked up to version 5.2 and > >there > >doesn't seem to be a command to do this like there is in IOS. > > > >Do any of you know a way to do this? > > > >Thanks, > >John > >_______________________________________________ > >cisco-nsp mailing list [email protected] > >https://puck.nether.net/mailman/listinfo/cisco-nsp > >archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
