Hi
I have Cisco ASR 903 with two RSPs
When I console to one for the RSPs , i am in the rommon mode
When I try to browse for the bootflash , I get the below message
rommon 1 > dir bootflash:
ERROR:: PRSSTAT.BREN is NOT set. Data xfr incomplete
FAILURE
prsstat ff8d0206 not ESDHC_PRSSTAT_BREN i=
0esdhc_wait_for_status_clr(556) ERR: bitmask=0x00000002 not clr PRSSTAT =
0xff8d0206 i=100000
sd_read_sector(1464) failed
Disk Error : Unable to read the drive'spartition table
>From the other RSP , when I issue the show platform command , the same RSP
>show as unknown
Any ideas?
BR,
Mohammad
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
