On 26/Mar/15 17:04, Eric Van Tol wrote:
I did quite a bit of testing in our lab prior to deployment, mainly to see if there was feature parity with the ME3600. Configuration and feature-wise, they were nearly identical, at least with regard to what we provide or plan to provide. It did take me some time to figure out how to get an "SVI" onto it, as I've never worked with IOS-XE and the documentation for the ASR920 is/was just terrible/incomplete.
Is it different from SVI's on the ME3600X/3800X?
Someone else had mentioned the Juniper ACX5048. I drooled over that when I first saw it, but then I noticed the environmental limitations - 32° to 104° F. That would work well in most colo or CO deployments, but most of our deployments are within telephone closets with little to no airflow or AC. I suppose I understand why the operating temp is so low, just a bit disappointed.
I'll forward this feedback to Juniper. Mark. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
