True. However, "logging monitor" plus "terminal monitor" change absolutely nothing.
I do expect more messages in the buffer, especially after having debugs turned on, for traffic that I know is transiting the router. At least acknowledgements of configuration changes. Something, besides messages incident to the router booting up. BTW, these 13 did not show up until 3-4 hours after boot. Thanks Sincerely, Michael -----Original Message----- From: Lukas Tribus [mailto:[email protected]] Sent: Tuesday, May 12, 2015 12:39 PM To: Michael Malitsky; [email protected] Subject: RE: [c-nsp] Logs are empty > Working with a brand new 2911, 15.4(3)M2. I can't get anything to show > up in the logs. > Neither monitor Which is disabled via "no logging monitor", so that should be expected? > nor buffer The "show logg" contains 13 messages from the buffer logging. Do you expect something else? Lukas _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
