I use a policy-map that looks like this, and works great: policy-map eox_10_mb_in_TEST class class-default service-policy Child_UNI_Ingress_TEST <-really not needed except for QoS shape average 10 mbps ! end-policy-map ! policy-map eox_10_mb_out_TEST class class-default service-policy Child_UNI_Egress_TEST <-really not needed except for QoS shape average 10 mbps ! end-policy-map !
interface Bundle-Ether117.1573 description xxxxx service-policy input eox_10_mb_in_TEST service-policy output eox_10_mb_out_TEST ipv4 address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx encapsulation dot1q 1573 ! On Wed, May 13, 2015 at 2:17 PM, Alejandro Aristizabal < [email protected]> wrote: > > Dear Cisco mates, > > > Id like to know how can I limit the BW on interface bundle ether in Cisco > ASR9K, > > I actually use the follow configuration but it doesnt work: > > interface Bundle-Ether2 > description LINK IXA INTER 530M+270M+184M > service-policy input BW_INTERNET_IXA > service-policy output BW_INTERNET_IXA > vrf INTERNET > ipv4 address 190.90.19.50 255.255.255.252 > ipv6 address 2800:310:10:6::22/126 > > > policy-map BW_INTERNET_IXA > class class-default > police rate 1000 mbps > conform-action transmit > exceed-action drop > ! > ! > end-policy-map > > > thanks for the hand you could give me > > > -- > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
