The configuration in your email is for local switching. If you have a PW between the two sites, you need to add xconnect configuration. http://www.cisco.com/c/en/us/support/switches/me-3600x-series-ethernet-access-switches/products-implementation-design-guides-list.html
Best Regards, [http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg] Waris Sagheer Technical Marketing Manager Service Provider Routing Segment wa...@cisco.com<mailto:wa...@cisco.com> Phone: +1 408 853 6682 Mobile: +1 408 835 1389 CCIE - 19901 <http://www.cisco.com/> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message. For corporate legal information go to:http://www.cisco.com/web/about/doing_business/legal/cri/index.html From: Dario Amaya <darioamay...@gmail.com<mailto:darioamay...@gmail.com>> Date: Wednesday, June 3, 2015 at 2:29 PM To: "cisco-nsp@puck.nether.net<mailto:cisco-nsp@puck.nether.net>" <cisco-nsp@puck.nether.net<mailto:cisco-nsp@puck.nether.net>> Subject: [c-nsp] ME3600 QinQ / Service Instance Hi list, Hoping I can get some advice on a simple setup: Two sites, each with an ME-3600X-24TS-M, L2VPN between the two on Te0/1. ME3600-SiteA: Te0/1 - L2VPN via PE Te0/2 - Customer equipment ME3600-SiteB: Te0/1 - L2VPN via PE Te0/2 - Customer equipment I want to accept all tags from the customer port Te0/2 at both sites and pass it across the L2VPN on Te0/1, back out on Te0/2 at the other side and vice-versa. Will the following config work: interface TenGigabitEthernet0/1 switchport trunk allowed vlan none switchport mode trunk load-interval 30 service instance 1 ethernet encapsulation default ! ! interface TenGigabitEthernet0/2 switchport trunk allowed vlan none switchport mode trunk load-interval 30 service instance 2 ethernet encapsulation default ! ! connect eline-1-2 TenGigabitEthernet0/1 1 TenGigabitEthernet0/2 2 Thanks in advance. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net<mailto:cisco-nsp@puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/