Normal routing is OK. But re-routing to the nexthop is not working at all. Instead of routing to x.x.x.x it is routed to router¹s default route.
Regards, Alex Le 7/13/15, 17:54, « Harold 'Buz' Dale » <[email protected]> a écrit : >I would think you could do something like this with the ACL. > >ipv4 access-list internet >10 permit ipv4 10.0.0.0/16 10.0.0.0/16 >20 permit ipv4 10.0.0.0/16 any nexthop1 ipv4 x.x.x.x > > > >Where if it is from 10/16 to 10/16 it just gets routed normally and make >sure that normal routing works right. >Luck, >Buz > >---------- >[email protected] >Network Support Specialist University System of GA -IT Services. >706-583-2052 or (Toll Free in GA) 888-875-3697 > > > > > > > >On 7/13/15, 6:51 AM, "Alex William" <[email protected]> wrote: > >>ipv4 access-list internet >>10 permit ipv4 10.0.0.0/16 10.0.0.0/16 default >> 20 permit ipv4 10.0.0.0/16 any nexthop1 ipv4 x.x.x.x >> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
