On Wed, 2015-08-05 at 22:38 +0300, Artem Viklenko wrote: > I expect that entering 'ip routing' shuld be non-disruptive to current > L2 traffic on stack as on standalone 3750-s. > > Is it right? Is there some possible concerns?
You should be fine, though OOB management and/or a way to cut the power is always a good idea. When enabling IP routing the CLI will pause for a few seconds. Make sure you have the "ip route 0.0.0.0 0.0.0.0 <gateway>" entered to replace the "ip default-gateway <gateway>". I have enabled routing (and disabled it again) many times on 3560/3750 switches to test things, never saw any problems. -- Peter _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/