2015-08-06 08:55, Peter Rathlev написав:
On Wed, 2015-08-05 at 22:38 +0300, Artem Viklenko wrote:
I expect that entering 'ip routing' shuld be non-disruptive to current
L2 traffic on stack as on standalone 3750-s.
Is it right? Is there some possible concerns?
You should be fine, though OOB management and/or a way to cut the power
is always a good idea.
I plan to schedule delayed reload first by 'reload in xxx' command.
When enabling IP routing the CLI will pause for a few seconds.
Make sure you have the "ip route 0.0.0.0 0.0.0.0 <gateway>" entered to
replace the "ip default-gateway <gateway>".
Yes, know it.
I have enabled routing (and disabled it again) many times on 3560/3750
switches to test things, never saw any problems.
Thanks to all replied!
--
Regards!
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
