Hi everyone, We are going to migrate to 7600 series router and after some study we came to below sets for router. We would run L2/L3 MPLS VPN, VPLS, BGP, IPv6, OSPF, Netflow. Traffic would be over 2 gbps and we need few 10G ports and scope for future growth and also consider cost. Which set would be the better?
*SET1 * *Product Name* *Part number* Cisco 7606 Chassis CISCO7606 Spare Power Supply PWR-2700-AC/4= Cisco 7600 Route Switch Processor 720 with 10 Gigabit Ethernet Uplinks RSP720-3CXL-10GE Cisco 7600 Series Ethernet Services Plus 20 G Line Card, 20-port GE SFP and DFC-3CXL 7600-ES+20-GE3CXL Cisco 7600 Series Ethernet Services Plus 20 G Advance License 76-ES20+-ADVIP-LIC Do I really need the *76-ES20-ADVIP-LIC *for MPLS. *SET 2 * *Product Name* *Part number* Cisco 7606 Chassis CISCO7606 Spare Power Supply PWR-2700-AC/4= Cisco 7600 Route Switch Processor 720 with 10 Gigabit Ethernet Uplinks RSP720-3CXL-10GE Cisco 7600 Series SPA Interface Processor-600 7600-SIP-600 Cisco 10-Port Gigabit Ethernet Shared Port Adapter SPA-10X1GE Is *WS-X6724-SFP* compatible with 7600? I didn't find any document. Thank you in advance. -- Regards, Md. Shoaib Farhan Network Operation Center Telnet Communication Ltd. House# 39 (8 & 9th Floor) Sonargaon Janopath Road Sec 7 , Uttara , Dhaka 1230 Bangladesh. Cell : +880-1755596725 E-mail : [email protected] Web : http://www.telnet.com.bd <http://www.telnet.com.bd> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
