Hi, Thanks for the suggestions, I will look into asr9001. We are using cisco 7200 NPE-G2.
On Mon, Sep 28, 2015 at 7:18 AM, Tony <[email protected]> wrote: > Hi, > > I'd have to agree with the other couple of responses thus far. > > We run 7600's around the place and our current planning focus is on what > we're going to be migrating TO (away from 7600) in the next 12-18 months. > Having said that, we have put in one or two additional 7600's this year, > but we already have a bunch of them and the reason for adding extra's is > that we understand them really well and are not quite ready to migrate to > something new just yet. > > One of our main reason for moving to something new is port density issues > (10G ports). > > The 7600's are quite cheap to pick up 2nd hand though (comparatively). > > In regard to your actual question, I would use the ES20+ cards over the > SIP-600. You'll get more Gig ports and better throughput (less > over-subscription). Cisco says you do need that license although > technically the box will run without the license (ie. it's honour system). > > You said you're wanting to migrate to the 7600, what are you migrating > FROM ? > > > regards, > Tony. > > > > > ----- Original Message ----- > From: Shoaib Farhan <[email protected]> > To: [email protected] > Cc: > Sent: Sunday, 27 September 2015, 16:06 > Subject: [c-nsp] Cisco 7600 Router Related > > Hi everyone, > > We are going to migrate to 7600 series router and after some study we came > to below sets for router. We would run L2/L3 MPLS VPN, VPLS, BGP, IPv6, > OSPF, Netflow. Traffic would be over 2 gbps and we need few 10G ports and > scope for future growth and also consider cost. Which set would be the > better? > > *SET1 * > > *Product Name* > > *Part number* > > > Cisco 7606 Chassis > > CISCO7606 > > > > Spare Power Supply > > PWR-2700-AC/4= > > > Cisco 7600 Route Switch Processor 720 with 10 Gigabit Ethernet Uplinks > > RSP720-3CXL-10GE > > > Cisco 7600 Series Ethernet Services Plus 20 G Line Card, 20-port GE SFP and > DFC-3CXL > > 7600-ES+20-GE3CXL > > > Cisco 7600 Series Ethernet Services Plus 20 G Advance License > > 76-ES20+-ADVIP-LIC > > > > Do I really need the *76-ES20-ADVIP-LIC *for MPLS. > > > *SET 2 * > > *Product Name* > > *Part number* > > Cisco 7606 Chassis > > CISCO7606 > > Spare Power Supply > > PWR-2700-AC/4= > > Cisco 7600 Route Switch Processor 720 with 10 Gigabit Ethernet Uplinks > > RSP720-3CXL-10GE > > Cisco 7600 Series SPA Interface Processor-600 > > 7600-SIP-600 > > Cisco 10-Port Gigabit Ethernet Shared Port Adapter > > SPA-10X1GE > > > Is *WS-X6724-SFP* compatible with 7600? I didn't find any document. > > Thank you in advance. > > > > > -- > > Regards, > > Md. Shoaib Farhan > Network Operation Center > Telnet Communication Ltd. > House# 39 (8 & 9th Floor) > Sonargaon Janopath Road > Sec 7 , Uttara , Dhaka 1230 > Bangladesh. > Cell : +880-1755596725 > E-mail : [email protected] > Web : http://www.telnet.com.bd > <http://www.telnet.com.bd> > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Regards, Md. Shoaib Farhan <http://www.telnet.com.bd> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
