Nick, The mention licensed is for Ethernet Line Cards. See the below link. Correct me if I'm wrong.
http://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/data_sheet_c78-501338.html For 20 x 1 GE Modular Port Adapter A9K-MPA-20x1GE http://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/data_sheet_c78-663866.html Do I really need that Licensed No information given in ASR9001 Data Sheet. http://www.cisco.com/c/en/us/products/collateral/routers/asr-9001-router/data_sheet_c78-685687.html On Thu, Oct 1, 2015 at 3:08 PM, Nick Hilliard <[email protected]> wrote: > For L3VPN with > 2 VPNs terminated on the box, you need A9K-9001-AIP-LIC. > > Nick > > On 01/10/2015 09:37, Shoaib Farhan wrote: > > Hi Nick, > > > > What licensed do I need then? Didn't find any document for the licensed > > information. > > > > On Thu, Oct 1, 2015 at 2:12 PM, Nick Hilliard <[email protected] > > <mailto:[email protected]>> wrote: > > > > On 01/10/2015 04:27, Shoaib Farhan wrote: > > > Look at asr 9001 and 1006. asr 9001 looks more promising. Asked > for price > > > to our vendors. Lets what they will say. > > > > > > We have asked for the below product. Do I need any licensed for > running > > > MPLS? > > > > yes, if you're running the device as a PE and you want to terminate > l3vpn > > edge services on it. Otherwise no. > > > > Regarding differences, this is a good place to start, even if the > software > > version is a bit out of date: > > > > > > > > http://www.cisco.com/c/en/us/td/docs/ios_xr_sw/iosxr_r3-3/conversion/reference/guide/cnvt_33/cn33main.pdf > > > > Nick > > > > > *Product Name Part number* > > > ASR 9001 Router with 4 x 10 GE ASR-9001 > > > 20 x 1 GE Modular Port Adapter A9K-MPA-20x1GE > > > AC Power Entry module A9K-750W-AC > > > > > > Can you give me short feature difference between IOS and IOS XR. > > > > > > As for ASR1000 it will be very costly. we have the below set > > > > > > chassis + RP2 + ESP-40 + Line Card/ SIP+SPA. > > > > > > > > > > > > > > > On Mon, Sep 28, 2015 at 12:50 PM, Mikael Abrahamsson > > <[email protected] <mailto:[email protected]>> > > > wrote: > > > > > >> On Sun, 27 Sep 2015, Shoaib Farhan wrote: > > >> > > >> Hi everyone, > > >>> > > >>> We are going to migrate to 7600 series router and after some > study > > we came > > >>> to below sets for router. We would run L2/L3 MPLS VPN, VPLS, > BGP, IPv6, > > >>> OSPF, Netflow. Traffic would be over 2 gbps and we need few 10G > > ports and > > >>> scope for future growth and also consider cost. Which set would > be the > > >>> better? > > >>> > > >> > > >> If you're buying the ES or SIP cards for the 7600, then you might > as > > well > > >> start looking into ASR1k and ASR9k (as others have suggested), > > because most > > >> likely the price difference is going to be small and you'll get > > >> hardware/software that is going to be supported for a lot longer > time. > > >> > > >> -- > > >> Mikael Abrahamsson email: [email protected] <mailto: > [email protected]> > > >> > > > > > > > > > > > > > > > > > > > -- > > > > Regards, > > > > Md. Shoaib Farhan > > <http://www.telnet.com.bd> > > -- Regards, Md. Shoaib Farhan <http://www.telnet.com.bd> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
