Hi folks, Sorry if this might be a 'stupid' question. I need to test a wireless mesh configuration and the only thing I have available to supply power to the access points (PoE+) is a 2960S switch.
The switch is isolated to the network, but when it seems that when I add more than one access point to it, they are 'talking' to each other. So is there a way to configure the ports so that the ports only supply power? The moment the second access point is connected and goes up, I start getting flapping errors. Thanks in advance for your help and apologies if it is indeed a dumb question. All I ask is that you minimize your laughs. :) Ricardo. -- °(((=((===°°°(((================================================ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
