Yeah TAC have confimred it is not possible. The only way is to use a looped cable between two ports but with a carrier NNI and many end sites comming in to the DC each over QinQ it would mean a looped cable (and thus 2 ports used) per end site (per S-VLAN) so it's a no go basically.
I was hoping the I was hoping the "encapsulation dot1q X second-dot1q Y" syntax would be supported so maybe we could at least use sub-interfaces facing the carrier but no. Cheers, James. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
