On 22 June 2016 at 01:01, chiel <ch...@gmx.net> wrote: Hey,
'> We have already relocated the CEF so tcam can can hold more ipv4 routes. But > the problem the last couple of weeks has been the RP memory. At this moment > its on 99% utilization of the max 1GB that the 720-3bxl can hold! On short > term we can downgrade back to 12.* version, or to "ip base" or "ip service" > branch, that might give us some room to breath. Or are we missing something > that could free up lots of memory on a 720-3bxl? I heard BGP Soft Reset > might free up some memory? Is this true and will it be significant? soft-reconfigure inbound will save some memory. But you're not really missing anything, 1GB is just not that comfortable amount of control-plane memory for full-table routing. Biggest gain you'll see is going back to 12.2S series. But you need to plan to upgrade your kit or filter outes. -- ++ytti _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/