I am following the IPsec example here: http://www.cisco.com/c/en/us/support/docs/ip/generic-routing-encapsulation-gre/9221-quicktip.html and have managed to alter the syntax to fit with IOS-XR but when I get to crypto map commands:
*crypto map myvpn 10 ipsec-isakmp set peer 192.168.2.2 set transform-set to_fred match address 101 * I cannot find any comparable command syntax in IOS-XR: RP/0/RSP0/CPU0:petach-tikva-gp(config)#crypto map VPN 15 gdoi ? fail-close Specify a fail-close ACL. interface Enable crypto map on an interface ipsec-node Set the ipsec node on this crypto map match Match values. set Set values What am I missing? Thanks, Hank _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
