Hi, I have two identical 7609 with RSP720-3CXL-10G.
"show platform hardware capacity fabric" command on any of 7609 gives me a similar output: Fabric utilization: Ingress Egress Module Chanl Speed rate peak rate peak 1 0 20G 63% 70% @22:41 29Oct17 35% 51% @20:35 15Oct17 1 1 20G 24% 39% @21:25 29Sep16 41% 59% @21:17 21Dec16 2 0 20G 18% 37% @21:34 16Sep17 53% 69% @21:33 16Sep17 2 1 20G 33% 57% @03:21 14Oct17 77% 90% @20:32 27Oct17 3 0 20G 66% 97% @03:22 14Oct17 47% 67% @20:32 06Jul17 3 1 20G 59% 98% @11:21 04Aug17 31% 84% @20:42 01Feb17 5 0 20G 71% 89% @21:54 20Oct17 83% 98% @22:24 29Oct17 5 1 20G 0% 4% @10:45 17Jan17 0% 30% @10:03 25Jul16 I wonder why the RSP uses only one channel as fabric connection. As you can see, it was overloaded (98% - it is overloading) yesterday. Is there any way to balance traffic between two fabric channels? Best regards, Valery Lutoshkin _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/