Send cisco-voip mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of cisco-voip digest..."
Today's Topics:
1. Re: Can a CUBE be used to connect CUCM and Asterisk to a SIP
Trunk (Nick Matthews)
2. CallManager 7.0.1CMPlatform set to Local vs NTP for clock
(Jason Aarons (AM))
3. Re: CallManager 7.0.1CMPlatform set to Local vs NTP for clock
(Nicholas Samios)
4. Re: CallManager 7.0.1CMPlatform set to Local vs NTP for clock
(Nicholas Samios)
5. Re: CallManager 7.0.1CMPlatform set to Local vs NTP for clock
(Jason Aarons (AM))
----------------------------------------------------------------------
Message: 1
Date: Sun, 2 Dec 2012 12:39:22 -0500
From: Nick Matthews <[email protected]>
To: Matthew Saskin <[email protected]>
Cc: "[email protected]" <[email protected]>
Subject: Re: [cisco-voip] Can a CUBE be used to connect CUCM and
Asterisk to a SIP Trunk
Message-ID:
<CAM-K-NqOLGJLT-GEksQ_u86x81xzYvNgTkoKw47skQ=bsfj...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Realistically you could probably trunk them together without CUBE. CUCM has
a lot more capability in altering the inbound/outbound SIP settings that
CUBE was used for previously. CUBE would make it potentially easier and
still makes the media exchange simpler, but my guess is with Asterisk for
50 phones this design aspect isn't significant.
I haven't seen any guides for either CUCM or CUBE connectivity to Asterisk,
but they're probably out there on the interwebs somewhere.
-nick
On Sun, Dec 2, 2012 at 10:33 AM, Matthew Saskin <[email protected]> wrote:
> This would not be a problem at all. The short answer is you'd end up
> having dial peers on the CUBE that route (via destination pattern, etc.)
> specific calls/DID's to the asterisk IP address and specific calls/DID's to
> the be6k address.
>
> -matthew
>
> Matthew Saskin
> [email protected]
> 203-253-9571
>
>
>
> On Sun, Dec 2, 2012 at 12:40 AM, Dieter Jansen
> <[email protected]>wrote:
>
>> Hi All,
>>
>> We are looking to replace an existing Asterisk PBX with about 40 SIP
>> handsets with a CUCM UC solution (BE6K) with about 50 new CP-8945s.
>>
>> The current installation uses a SIP trunk and we plan to keep using this
>> to connect to the PSTN. We have a 100 DID block for our incoming calls.
>>
>> As we have comparatively little experience with the Cisco solution we're
>> looking at a soft introduction and will probably have both sets of handsets
>> in place in parallel for a while.
>>
>> I've got all the edge switches and VLANing working - independent data,
>> voice and legacy voice VLANs/subnets and all required routing between.
>> We're at the point where test phones can place video calls to each other
>> so we now need to get routing and PSTN access happening
>>
>> Originally I was thinking I'd set up a CUCM-behind-Asterisk
>> or Asterisk behind-CUCM situation whilst testing but on reading the Cisco
>> documents and books I've noted the suggested use of a CUBE SBC. As we have
>> a spare router that can probably do CUBE I was wondering if I should set
>> that up to register with our VSP.
>>
>> In the first instance I'd get the Asterisk box to pass calls to the CUBE
>> and have the CUBE forward all incoming calls to the Asterisk.
>>
>> What I'm hoping is that I could then also have the CUCM pass calls to the
>> same CUBE and route a subset of the inward DIDs to the CUCM whilst testing
>> - allowing me to get all the setup sorted whilst easily flipping incoming
>> calls to specific DID between Asterisk and CUCM.
>>
>> I've not seen an example of the CUBE being used in this way - is it
>> possible?
>>
>> Regards, JustTemprament.
>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> [email protected]
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20121202/15b03869/attachment-0001.html>
------------------------------
Message: 2
Date: Sun, 2 Dec 2012 21:19:39 -0500
From: "Jason Aarons (AM)" <[email protected]>
To: "cisco-voip ([email protected])"
<[email protected]>
Subject: [cisco-voip] CallManager 7.0.1CMPlatform set to Local vs NTP
for clock
Message-ID:
<4e38db0a1959b04c8c83edcf069b53ed0d2baa5...@usispclexdb01.na.didata.local>
Content-Type: text/plain; charset="windows-1252"
How do I change the Pub 's time in the CLI fro CallManager 7.0.1 ? We don't
have NTP configured, and I need to manually adjust the time.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20121202/03f0cb66/attachment-0001.html>
------------------------------
Message: 3
Date: Mon, 3 Dec 2012 06:45:39 +0000
From: Nicholas Samios <[email protected]>
To: "Jason Aarons (AM)" <[email protected]>, "cisco-voip
([email protected])" <[email protected]>
Subject: Re: [cisco-voip] CallManager 7.0.1CMPlatform set to Local vs
NTP for clock
Message-ID:
<d96e7b682f2065479ed12359e4756a6c24f94...@isd-anx-dag2.win2k.iinet.net.au>
Content-Type: text/plain; charset="us-ascii"
You don't adjust the time, rather the timezone.
Show timezone config - displays current configured TZ.
Show timezone list - displays all the TZ index IDs
Set timezone XXX - set the TZ index ID
You will need to apply this to pub/sub and reboot the cluster.
From: [email protected]
[mailto:[email protected]] On Behalf Of Jason Aarons (AM)
Sent: Monday, 3 December 2012 1:20 PM
To: cisco-voip ([email protected])
Subject: [cisco-voip] CallManager 7.0.1CMPlatform set to Local vs NTP for clock
How do I change the Pub 's time in the CLI fro CallManager 7.0.1 ? We don't
have NTP configured, and I need to manually adjust the time.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20121203/b89a1556/attachment-0001.html>
------------------------------
Message: 4
Date: Mon, 3 Dec 2012 06:55:03 +0000
From: Nicholas Samios <[email protected]>
To: "Jason Aarons (AM)" <[email protected]>, "cisco-voip
([email protected])" <[email protected]>
Subject: Re: [cisco-voip] CallManager 7.0.1CMPlatform set to Local vs
NTP for clock
Message-ID:
<d96e7b682f2065479ed12359e4756a6c24f94...@isd-anx-dag2.win2k.iinet.net.au>
Content-Type: text/plain; charset="us-ascii"
Addendum to that - the cluster does run NTP regardless if external source
configured
Pub serves NTP using its internal hardware clock if no external NTP source
configured.
Sub polls Pub for NTP.
From: [email protected]
[mailto:[email protected]] On Behalf Of Nicholas Samios
Sent: Monday, 3 December 2012 5:46 PM
To: Jason Aarons (AM); cisco-voip ([email protected])
Subject: Re: [cisco-voip] CallManager 7.0.1CMPlatform set to Local vs NTP for
clock
You don't adjust the time, rather the timezone.
Show timezone config - displays current configured TZ.
Show timezone list - displays all the TZ index IDs
Set timezone XXX - set the TZ index ID
You will need to apply this to pub/sub and reboot the cluster.
From:
[email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Jason Aarons (AM)
Sent: Monday, 3 December 2012 1:20 PM
To: cisco-voip ([email protected]<mailto:[email protected]>)
Subject: [cisco-voip] CallManager 7.0.1CMPlatform set to Local vs NTP for clock
How do I change the Pub 's time in the CLI fro CallManager 7.0.1 ? We don't
have NTP configured, and I need to manually adjust the time.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20121203/80673df4/attachment-0001.html>
------------------------------
Message: 5
Date: Mon, 3 Dec 2012 07:13:16 -0500
From: "Jason Aarons (AM)" <[email protected]>
To: Nicholas Samios <[email protected]>, "cisco-voip
([email protected])" <[email protected]>
Subject: Re: [cisco-voip] CallManager 7.0.1CMPlatform set to Local vs
NTP for clock
Message-ID:
<4e38db0a1959b04c8c83edcf069b53ed0d2baa5...@usispclexdb01.na.didata.local>
Content-Type: text/plain; charset="windows-1252"
How do you change the internal hardware clock time? Reboot and go into BIOS?
I'm familiar with how it works, just not how to change the time on the Pub
using the CLI.
During install if you choose no to NTP with 7.0.1 you get a dialog to set the
local clock manually.
From: Nicholas Samios [mailto:[email protected]]
Sent: Monday, December 03, 2012 1:55 AM
To: Jason Aarons (AM); cisco-voip ([email protected])
Subject: RE: [cisco-voip] CallManager 7.0.1CMPlatform set to Local vs NTP for
clock
Addendum to that - the cluster does run NTP regardless if external source
configured
Pub serves NTP using its internal hardware clock if no external NTP source
configured.
Sub polls Pub for NTP.
From: [email protected]
[mailto:[email protected]] On Behalf Of Nicholas Samios
Sent: Monday, 3 December 2012 5:46 PM
To: Jason Aarons (AM); cisco-voip ([email protected])
Subject: Re: [cisco-voip] CallManager 7.0.1CMPlatform set to Local vs NTP for
clock
You don't adjust the time, rather the timezone.
Show timezone config - displays current configured TZ.
Show timezone list - displays all the TZ index IDs
Set timezone XXX - set the TZ index ID
You will need to apply this to pub/sub and reboot the cluster.
From:
[email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Jason Aarons (AM)
Sent: Monday, 3 December 2012 1:20 PM
To: cisco-voip ([email protected]<mailto:[email protected]>)
Subject: [cisco-voip] CallManager 7.0.1CMPlatform set to Local vs NTP for clock
How do I change the Pub 's time in the CLI fro CallManager 7.0.1 ? We don't
have NTP configured, and I need to manually adjust the time.
itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://puck.nether.net/pipermail/cisco-voip/attachments/20121203/facde9c7/attachment-0001.html>
------------------------------
_______________________________________________
cisco-voip mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/cisco-voip
End of cisco-voip Digest, Vol 110, Issue 3
******************************************
