You can make SRST configurations for calls to be sent to the DIDs of the CTI Route Points. But what would make this fail is the call from the CTI RP to the CTI Port is a Call redirect. This means a call redirect request is sent new leg is created with calling number same as the original calling number but the called number is now the CTI port and the previous call leg which reached the CTI RP via SRST is disconnected. What happens to the call redirect request? How would you reach the CTI port? that’s the question.
Regards, Abhiram Kramadhati Technical Solutions Manager, CBABU CCIE Voice # 40065 From: <Armstrong>, Michael <michael.armstr...@cccs.edu<mailto:michael.armstr...@cccs.edu>> Date: Thursday, 16 April 2015 1:53 am To: "cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>" <cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>> Subject: [cisco-voip] SRST for UCCX CTI Route Points Hello, Any ideas for an SRST configuration for a WAN outage that is preventing calls to a UCCX CTI Route Point? Calls to the RP are fine via the attached PRI’s but calls via the WAN cannot see the route point. Michael Armstrong | Sr. Unified Communications Admin| Colorado Community College System | P:720.858.2882 | C:720.891.6010
_______________________________________________ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
