From: akramadh <akram...@cisco.com<mailto:akram...@cisco.com>>
Date: Thursday, 16 April 2015 9:42 am
To: "Armstrong, Michael" 
<michael.armstr...@cccs.edu<mailto:michael.armstr...@cccs.edu>>, 
"cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>" 
<cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>>
Subject: Re: [cisco-voip] SRST for UCCX CTI Route Points

You can make SRST configurations for calls to be sent to the DIDs of the CTI 
Route Points. But what would make this fail is the call from the CTI RP to the 
CTI Port is a Call redirect. This means a call redirect request is sent with 
the redirect destination as the CTI port the UCCX has chose and then a new leg 
has to be created with calling number same as the original calling number but 
the called number is now the CTI port and the previous call leg which reached 
the CTI RP via SRST disconnected. What happens to the call redirect request? 
How would you reach the CTI port? that’s the problem

Regards,
Abhiram Kramadhati
Technical Solutions Manager, CBABU
CCIE Voice # 40065

From: <Armstrong>, Michael 
<michael.armstr...@cccs.edu<mailto:michael.armstr...@cccs.edu>>
Date: Thursday, 16 April 2015 1:53 am
To: "cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>" 
<cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net>>
Subject: [cisco-voip] SRST for UCCX CTI Route Points

Hello,

Any ideas for an SRST configuration for a WAN outage that is preventing calls 
to a UCCX CTI Route Point? Calls to the RP are fine via the attached PRI’s but 
calls via the WAN cannot see the route point.

Michael Armstrong | Sr. Unified Communications Admin| Colorado Community 
College System |
P:720.858.2882 | C:720.891.6010

_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Reply via email to