ISDN works fine. It's when the calls come in on the POTS line. I did find this by googling:
interface serialx/x/x:23 isdn supp-service name calling I am not sure about the :23 after the serial port designation... On Wed, Feb 3, 2016 at 12:23 PM, Brian Meade <[email protected]> wrote: > Does the carrier send the caller name in the ISDN Setup message or in a > separate Facility message? Can you show "debug isdn q931" for one of these > inbound calls? > > On Wed, Feb 3, 2016 at 12:13 PM, David Zhars <[email protected]> wrote: > >> Cisco UCM 8.0 with 2801 in MGCP mode. >> Telco is sending Name and Number to us. >> Phones only ever display Number. >> >> In UCM, selected phones have both Caller Name and Caller Number ticked. >> >> Anything else could be preventing us from getting Names? >> >> _______________________________________________ >> cisco-voip mailing list >> [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-voip >> >> >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
