What CUCM/IOS version? Do you have "Enable Caller ID" checked on the MGCP FXO device? You should have "caller-id enable" under the voice-port on the router.
http://www.gossamer-threads.com/lists/cisco/voip/131620 On Wed, Feb 3, 2016 at 12:28 PM, David Zhars <[email protected]> wrote: > Sorry, just noticed in that example they reference ISDN. Again, calls > coming in on ISDN are fine, we get name and number. > It's when calls come in on the POTS lines that we just get the phone > number. > > On Wed, Feb 3, 2016 at 12:27 PM, David Zhars <[email protected]> wrote: > >> ISDN works fine. It's when the calls come in on the POTS line. >> >> I did find this by googling: >> >> interface serialx/x/x:23 >> isdn supp-service name calling >> >> I am not sure about the :23 after the serial port designation... >> >> >> On Wed, Feb 3, 2016 at 12:23 PM, Brian Meade <[email protected]> wrote: >> >>> Does the carrier send the caller name in the ISDN Setup message or in a >>> separate Facility message? Can you show "debug isdn q931" for one of these >>> inbound calls? >>> >>> On Wed, Feb 3, 2016 at 12:13 PM, David Zhars <[email protected]> wrote: >>> >>>> Cisco UCM 8.0 with 2801 in MGCP mode. >>>> Telco is sending Name and Number to us. >>>> Phones only ever display Number. >>>> >>>> In UCM, selected phones have both Caller Name and Caller Number ticked. >>>> >>>> Anything else could be preventing us from getting Names? >>>> >>>> _______________________________________________ >>>> cisco-voip mailing list >>>> [email protected] >>>> https://puck.nether.net/mailman/listinfo/cisco-voip >>>> >>>> >>> >> >
_______________________________________________ cisco-voip mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-voip
