The module is the single LCD flat one, not the dual screen angled one.  The
module in CUCM is listed as "BEKEM 36-Button Line Expansion Module" as
opposed to "CP-8800-Video 28 Button Key Expansion Module" or even
"CP-8800-Audio 28 Button Key Expansion Module"

Interestingly, I have both an 11.5(1)SU3 and an 11.5(1)SU4 deployment to
look at, and the SU3 one doesn't have the newer KEM selections in the drop
down, but the SU4 one does.  So, you would think that the SU4 Release Notes
would mention it, but there's nothing in there.

I'd be surprised if the module itself is causing the phone to negotiate
video or not, but I suppose Cisco does like to keep us on our toes.


On Fri, Aug 10, 2018 at 11:30 AM Matthew Loraditch <
mloradi...@heliontechnologies.com> wrote:

> The CP-BEKEM or the newer one? I’m speculating based on the way the newer
> one is listed as a video expansion module in some places you need the newer
> one..
>
>
>
>
> Matthew Loraditch​
> Sr. Network Engineer
> p: *443.541.1518* <443.541.1518>
> w: *www.heliontechnologies.com* <http://www.heliontechnologies.com/>  |
> e: *mloradi...@heliontechnologies.com* <mloradi...@heliontechnologies.com>
> [image: Facebook] <https://facebook.com/heliontech>
> [image: Twitter] <https://twitter.com/heliontech>
> [image: LinkedIn] <https://www.linkedin.com/company/helion-technologies>
> [image: Helion joins Automotive CX Summit]
> <https://heliontechnologies.com/events/14th-annual-automotive-cx-summit-hosted-thought-leadership-summits/>
> *From:* cisco-voip <cisco-voip-boun...@puck.nether.net> *On Behalf Of *Anthony
> Holloway
> *Sent:* Friday, August 10, 2018 12:13 PM
> *To:* Cisco VoIP Group <cisco-voip@puck.nether.net>
> *Subject:* [cisco-voip] 8865 + KEM + Video Calls
>
>
>
> I have a use case on an 8865 with the KEM, and a Line configured per the
> usual setup.  If that line is on the phone itself, I can call it, and get
> video to establish.  If I move the line to the KEM, I can call it, but get
> audio only.
>
>
>
> Is that working as designed, a configuration miss on my part, or a defect?
>
>
>
> Unfortunately, I don't have access to many expansion modules (none
> actually), so testing different setups/firmware versions is not possible.
>
>
>
> Thanks in advanced.
>
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Reply via email to