The switch-type could be quite relevant. A colleague of mine found that using
switch-type basic-net3, Layer1 and Layer2 didn't show as active until a call
was placed, but it worked fine. I haven't used BRI ports much, but using
switch-type basic-ts013, L1 and L2 did become active, but it took a surprsingly
long time after a reload.
JMcL
---------------------- Forwarded by Jenny Mcleod/NSO/CSDA on 12/05/2000 09:26
---------------------------
"Stull, Cory" <[EMAIL PROTECTED]> on 12/05/2000 01:47:57
Please respond to "Stull, Cory" <[EMAIL PROTECTED]>
To: "Sanjay.Padmanabhan" <[EMAIL PROTECTED]>
cc: [EMAIL PROTECTED] (bcc: JENNY MCLEOD/NSO/CSDA)
Subject: RE: ISDN router config..
check your isdn switch type.. try using isdn switch-type basic-ni1
becaues it will supposedly work for all switch types. If your layer 1 is
down then it usually points to wiring, equipment, or usually switch type.
Cory
-----Original Message-----
From: Sanjay.Padmanabhan
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 11, 2000 7:11 AM
To: [EMAIL PROTECTED]
Subject: ISDN router config..
Hi Gurus,
I have a small problem configuring a Cisco 1603 router. This router has a
ethernet port and integrted BRI. I want a PC to dial into the BRi port of
the router. Now the problem, I am Facing is that I can configure the BRI
port. But when I check the ISDN status with the SH ISDN STAT commnad. the
layer 1, and layer 2 are shown as deactivated. Any suggestions on this will
be appreciated.
Rgds
Sanjay
********************************************************************
Any opinions, express or implied, presented are solely those
of the author and do not necessarily represent those of
Standard Chartered Group
********************************************************************
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
