You should be able to ping the local end if your using point-to-point
subinterface. For multipoint and no sub-interfaces you need to use a local
mapping.
Regards,
Mark
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of iancu
mihai
Sent: Saturday, May 13, 2000 6:06 AM
To: [EMAIL PROTECTED]
Subject: newbie question: frame-relay
Hi all,
I know this have been on the list but I can't find it in my message
archives right now.
I can do a ping on a remote ip address of a frame-relay configured link
but not on the peer ip address of the local interface.
Why is that?
In case of a hdlc/ppp configured link - I can do a ping on both ip
addresses of the link.
Thx a lot.
Mihai Iancu
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
