I had the same situation a while back....I was able to ping the remote
interface address but not the local address; my issue had to do with 2
MC3810's that
weren't running the same IOS; I upgraded to the same IOS and then everything
was just fine:: that is if both your local/remotes are the same series this
may help out......You may want to run debug frame-relay lmi on both ends and
make sure that the interface is exchanged lmi packets with the FR Switch....
--jek--
CCNA
"iancu mihai" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> I know this have been on the list but I can't find it in my message
> archives right now.
>
> I can do a ping on a remote ip address of a frame-relay configured link
> but not on the peer ip address of the local interface.
>
> Why is that?
>
> In case of a hdlc/ppp configured link - I can do a ping on both ip
> addresses of the link.
>
> Thx a lot.
>
> Mihai Iancu
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
