Policy based routing. write a route-map and apply it to the
interface/protocol depending on what/how you wanna do it...
example:
int f/a 0/0
route-map <name>
or
router bgp xxxx
neighbor xxx.xxx.xxx.xxx route-map <name> in/out
-----Original Message-----
From: Nodir Nazarov [mailto:[EMAIL PROTECTED]]
Sent: Friday, May 19, 2000 9:27 AM
To: [EMAIL PROTECTED]
Subject: load balancing based on source address
Hello,
How do I load balance my traffic depending on source network address ?
If I have 2 LANs attached to a router and 2 serials (both default
routes) , how do I route traffic of a LAN to certain default route
(certain srial) ?
Thank you,
Nodir
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
