Joe is on the money. I have (2) FX-S modules, and (2) NM-1V modules. They
are what I used to practice voice for the CCIE lab certification. I sold
the routers they were in, so if anyone wants the voice gear, let me
know...$2800 and they're yours.
-Brad Ellis
CCIE#5796
"Joe Pinkus" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Billy,
>
> To setup up the basics all you need is an fxs port on both routers,
connect the
> routers back to back with serial, then you can create voice pots and voice
voip
> dial-peers and have at it.
>
> Joe
>
> Billy Monroe wrote:
>
> > Hello:
> >
> > Does anyone know if it is possible to setup a VoIP lab using two C2600
(and
> > phones) ?
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
