Just a couple questions that popped into mind:
What is your addressing for the sc0 interface on the Cat5500?
Are you trying to ping by IP address or name?
Jim
Cristina Hoselins wrote:
> All,
>
> This is a stupid question:
> I have recently run into some information that has caused me to doubt
> the way a switch works.
>
> SITUATION:
> R1(E0)------(2/6)Cat5500(2/7)------(e0)R2
> A catalyst 5500 (no RSM) with 2 VLAN's configured: Vlan 1, Vlan 2,and 2
> routers, both routers configured for VLAN 1 with 24 bit subnet mask, SC0 is
> part of VLAN1
> by default
> R1 pings R2 OK
> R2 pings R1 OK
> Cat5500 pings both routers OK
> SO far so good...
> Now I moved 2/6 and 2/7 to VLAN 2, set the vtp domain name XY and try to
> ping
> R1 pings R2 OK
> R2 pings R1 OK
> Cat5500 cannot ping the routers,neither the routers can ping the Cat5500..
> when you do a SH CDP NEIGH it sees both routers, SCO is still in VLAN1...I
> moved SC0 into VLAN 2, doesn't make a difference... DOes anybody know why
>
> It's much appreciated.
> Thank you
> Cristina
>
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
--
Jim Healis
Sr. Network Engineer
wine.com
Tel: (510) 818-7300
Cell: (510) 418-6210
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
